If you have a plunger, you can use it to force some of the bowl water to drain. Wear rubber gloves for this because the bowl water is dirty. If the toilet has a ball float, bend it out of the way (if you’re discarding the toilet) or remove it to get better access to the tank (if you're going to reinstall the toilet somewhere else). Use the sponge to soak up the water, then wring it out into the bucket. With the tank lid off, flush the toilet again, if necessary, and hold the flapper open to let most of the water drain out of the tank. If the tank isn’t refilling, you’re good to go. Check that the water’s off by removing the tank lid and flushing the toilet. shims (in case the floor is out of level).rags, small towels (to catch spills and drips).paper towels (to dispose of the old wax ring).putty knife (to remove the old wax ring).utility knife (to pop the bolt caps and break the caulk seal).large adjustable wrench or slip-joint pliers (just in case).adjustable wrench (for bolting and unbolting).rubber gloves (to protect from toilet bowl water).

sponge and bucket (to remove water from the tank and bowl).You never have all of the tools and equipment you’ll need, so here’s a list of what you should bring with you: And even if you have done it before, Danny's got some useful tips and tricks that will make for an easier, better-looking job next time. Here’s a step-by-step look from Danny the Plumber at replacing a one-piece toilet that, if you’ve never done it before, will help you get through it without making a mess or having to make a bunch of trips to the hardware store. It helps to know a little bit about everything, including plumbing. Replacing a toilet is a task most remodelers will have to do much more than they want to, so get it right the first time

1piece toilet replacement